WST-500 Thermal Commercial Storefront Doors


WST-500 Thermal Commercial Storefront Doors

Thermally broken (NAFS)
Structural Rigidity
Testing exceeds standard ASTM/AAMA

WST-500 Monumental Commercial Storefront doors provide security and strength along with the environmental benefits the industry demands. This allows for these doors to be utilized in LEED and net zero projects.

These doors employ our unique mortise and tenon joinery along with tie rod construction. The structural rigidity allowed these doors to be tested with wind loads surpassing 200 mph.

These commercial storefront doors are available in dual finish options allowing a plethora of design ideas. The outside of the building could have a durable 20 year fade resistant kynar paint while the interior could possibly have a warmer wood grain look. This product is widely becoming our most requested Stile & Rail Door entrance.

WST-500 Stile and Rail Door

5/16"Internal Wall


beyond compare

Mortise & Tenon Joinery



Fixed Exterior Glazing Leg


glazing system


Door Thickness
Max Door Width
Max Door Height
Face Thickness
Edge Thickness
Stile Dimensions
Rail Dimensions
3/4" to 20"
Door Assembly
Tie Rod
Mortise & Tenon
Thermal Break
Polymide 66
Glass Capture
Glass Infill Range
1/4" to 1 1/4"
Exterior Glazing
Interior Glazing


Air Infiltration
6.2 psf
Water Penetration
6.27 psf
Forced Entry Resistance
300 lb
Uniform Load Structural
157.89 psf
Condesation Resistance Factor
64 CRF

Featured Jobs

Andrews University
Andrews University
Western Michigan University, Fetzer Building
Western Michigan University, Fetzer Building
St Joseph High School
St Joseph High School

Rail Configurations

Stile and Rail Door Rail Configurations

Structural Integrity. Unlimited Designs

Cross Aluminum’s stile and rail entrances can have rails ranging from 3/4” up to 20”.  These rails are typically used at the top, bottom, and middle of the door, but they can also be placed anywhere along the height to match the building façade. 

Stile and Rail Door Designs

World Class Quality. Full range of finishes and colors.

Anodizing aluminum is an electrochemical process that oxidizes the material. This provides a protective layer around the aluminum. Anodizing allows the finished products to be corrosion resistant and maintenance-free for years. Cross Aluminum only utilizes the Acid Etch Anodize process in order to improve product finish quality and color consistency. Furthermore, acid etching can reduce up to 90% of the aluminum sludge and waste used in typical caustic etch anodizing processes.


Simplicity at its finest. Secure Glaze Technology.

Cross Aluminum has always distinctively designed glazing to enhance the structural strength of the door. Every glazed entrance at Cross Aluminum will come with a secure non-removeable exterior glass stop.  Glazing kits are unacceptable and compromise the strength and security of any entrance, that is why our glazing is incorporated as part of the structure of the door. Furthermore, all glazing parts will match the finish of the door, unless specified otherwise.